Stamped concrete services in Las Cruces NM - the look of stone or brick in one slab
Pattern, color and joints planned before the pour
Stamped concrete gives a patio, walkway or driveway a patterned, colored surface without laying stone piece by piece. Most people call us when a plain gray slab feels unfinished or old pavers have started to shift. I'd rather talk through how you'll use the slab before we pick a color or a pattern.
Stamped concrete gives you the look without the pieces
Stamped concrete is a regular pour that we color, press with pattern mats while it's soft and then seal, so you get the look of stone, brick or wood in one slab. Underneath, it's flatwork like any concrete sidewalk, so it still needs a packed base and steel sized to the job.
Size, pattern and color method move the price most, and pour-day weather moves the schedule. Your own number comes with the estimate.
Best for
- Back patios and courtyards
- Front walks and entries
- Driveways that see traffic
One slab, no loose pieces
You get a laid-stone look without hundreds of pavers that can shift, settle or grow weeds in the gaps, because the pattern is pressed into a single pour.
The base comes first
We dig out and pack the subgrade, the ground the slab rests on. It's hidden on day one, so it's the first budget cut people suggest and the last I'd make.
Sealed to shed water
We finish with a sealer, and the film-forming kind most used on stamped work brings the color up while helping the surface shed water and stains.
A plan you understand
I go over the pattern, the color and where the joints will run with you before we form anything, so you know what you're paying for.
How stamped concrete and the work under it hold up
- I come out myself to measure and write the estimate, then I run the job from forming through finishing while our crew does the work.
- The stamping window is short, so we bring enough hands to press the mats section by section before the surface gets too stiff to take a clean pattern.
- We've been in business since 2017. We're licensed and insured, and I'd rather answer one more question than leave you guessing at the plan.
Color, pattern and border choices
We talk through how you'll use the slab before picking a color method, because a driveway and a back patio wear differently, and a garage floor is another story again.
Integral color
Color mixed through the full depth suits a patio where you want a chip to match the surface and can live with softer tones.
Color hardener
Color spread over the fresh surface and floated in suits anyone after deeper, brighter tones than integral color can reach.
Stone or brick pattern
Pressed patterns like flagstone, cobble or brick suit patios and entries where you want a laid-by-hand look in one slab.
Stamped border
A stamped band framing a plain broom finish, the light texture that gives grip, suits walkways and tighter budgets.
Tell us about your slab
Send the slab's size, whether it's a patio, walkway or driveway, and the look you want. We reply within one business day, and the on-site estimate is free with no obligation.
Stamped concrete questions we hear
Which color method is best for a stamped concrete driveway?
Color hardener is the usual choice for a driveway, because floating it into the fresh surface builds a harder skin that stands up to traffic. The trade-off is that its color sits only in the top layer, so a deep gouge shows gray concrete underneath.
Will stamped concrete crack like my old patio did?
Concrete can crack no matter who pours it, but well-placed joints control where cracks go and keep them small. That's why we plan the control joints, the cuts that give the slab a neat place to crack, along with the pattern from the first sketch.
How often does stamped concrete need to be resealed?
Reseal when the surface tells you to, not on a set schedule. Trade guidance points to two signs, water and stains no longer beading off, or the color looking flat and faded. When you see either one, it's time for a fresh coat.
How much does stamped concrete cost in Las Cruces?
Stamped concrete in Las Cruces usually costs about $12 to $24 per square foot. That's the going rate in the area, not a quote from us. Your own number comes from the estimate, where I measure the job and put the scope in writing.
Do I need a permit for stamped concrete in Las Cruces?
We check that for every address, because the City of Las Cruces reviews applications for most building projects before it issues a permit, and owners apply through its online portal. Stamped work that reaches into the public area at the street also has to meet the city's standards. When a permit is needed, we handle the application and keep you posted.
How do I check a concrete contractor's license in New Mexico?
Look the contractor up on the state's online license search before you sign, because New Mexico requires a license for anyone doing or offering construction contracting. The state licensing board points owners to that search at public.psiexams.com, and we'd rather you check than wonder.
Other concrete work we do
Concrete sidewalk building
A new walk leading up to a stamped patio can carry the same border, so the two read as one.
Explore Concrete sidewalk buildingGarage floor concrete
When the slab sits indoors under tires and tools, a plain, tough garage floor usually serves better.
Explore Garage floor concrete