Concrete footings in Las Cruces NM - a solid base sized for what sits on top
Planned around what they hold up
Footings are the concrete that a deck post, a wall or an addition stands on. Las Cruces homeowners usually call us when they're planning something new on the lot. I start by asking what the footing has to carry, because that decides everything after it.
Why concrete footings come first on any build
A footing is the wide concrete pad under a post or wall that spreads its weight into the ground. The price depends on the footing type and whether it gets rebar, the steel inside that adds strength. The schedule depends on the permit and the weather, and I put your scope in writing at the estimate.
When a new post lands on an old patio, concrete cutting opens a spot for it. A house that's already settling needs foundation raising instead.
Best for
- Deck and porch posts
- Garden and block walls
- Room additions
- Carports and pergolas
Sized to the load
We size each footing to what sits on it, so a light deck post isn't overbuilt and a heavy wall isn't left short.
A clean, firm bottom
We clear loose dirt from the bottom of every hole before the pour, because a footing sitting on loose fill settles right along with it.
Lined up with your plans
We stake out every footing from your plans before we dig, so posts and walls land on center instead of hanging off an edge.
Time to cure
Curing is the wait while concrete gains strength. We keep the concrete damp through that wait so it doesn't dry out weak before anything goes on top.
Concrete footings and the work that keeps them steady
- I come out myself to measure and write the estimate, then run the job from forming through finishing, so the person who measured is there for the pour.
- We've been in business since 2017. When a footing gets rebar, we set the steel on supports so it sits inside the concrete, where it adds strength.
- We're licensed and insured. The state's GS-4 class covers concrete work from digging and forms to rebar, so ask any contractor which class they hold.
Footing choices for your project
Once I know what the footings will carry, I lay out plain and reinforced options side by side so you can weigh the added strength against the cost.
Pier footings
Single round or square footings under deck posts, porch posts and pergolas, where the weight comes down at a few points.
Wall footings
A continuous strip of concrete under a block wall or an addition's wall, so the weight spreads along its whole length.
Plain footings
Concrete with no steel inside, the simpler, lower-cost choice, and usually enough for lighter loads like a small deck.
Reinforced footings
Rebar or mesh adds strength for heavier loads and walls but costs more, and I'll walk you through that trade-off.
Tell us what your footings will carry
Send the address and what the footings will support, or call. We reply within one business day to set up a free on-site estimate, with no obligation.
Footing questions we hear in Las Cruces
Which concrete footing type fits my project in Las Cruces?
The type follows what the footing holds up. Footings range from simple pier footings for decks and posts to T-shaped footings engineered for frost-prone regions. The type you choose has a direct effect on what the job costs, so I'll go over it with you against your plans at the estimate.
Do I need a permit for concrete footings in Las Cruces?
Most likely. Most building projects in Las Cruces need city review before a permit is issued, and the state's no-permit list includes sheds up to 120 square feet. The city processes residential permits within 0 to 3 business days through its Citizen Portal, so we plan the pour around that. We handle the application and keep you posted.
Can I get a permit to pour footings on my own home in New Mexico?
Yes. The state offers a homeowner permit for building, altering, repairing or improving your own primary residence. You read and sign the permit instructions, then read, sign and notarize a homeowner's responsibilities form. You'll also need a foundation plan showing each footing's size, location and depth below grade, plus a soil report when one is required.
Does summer heat in Las Cruces affect a concrete footing pour?
It can. National guidance on hot-weather concrete says high heat, low humidity and high wind affect the concrete and how a crew mixes, hauls and places it. That guidance lays out steps to lower the chance of serious problems, so ask how a crew plans for those days. We schedule pours early when we can and keep the concrete damp while it cures.
Do concrete footings need maintenance once they're in?
Very little, though an occasional professional inspection catches early cracking or settling before it gets costly. Keeping drainage paths clear and watching for water pooling around the posts or wall both help footings last longer.
Related concrete work
Foundation raising
When a house or slab has already sunk, lifting it back up comes before any new footing work.
Explore Foundation raisingConcrete cutting
Clean cuts through an old patio or slab open room for new footings without breaking up the whole surface.
Explore Concrete cutting