Concrete Pool Decks in Las Cruces NM - a deck with good grip for wet, bare feet
Planned for grip, heat and drainage
A concrete pool deck in Las Cruces is a slab that stays wet and gets walked on barefoot, so the surface matters more than it does on a patio. Most calls come with a new pool or a deck that's cracked or lifted. We plan the finish, the ground and the drainage before we pour.
A concrete pool deck built for wet feet
The job covers digging out, building forms, setting rebar, the steel that holds the slab together, and then pouring and finishing the concrete. The price moves with the deck's size, the finish and how much ground work your yard needs, and the schedule turns mostly on that ground work. The estimate puts your scope in writing.
If the deck meets a back door or drops to the yard, we can pour concrete steps to match.
Best for
- New in-ground pools
- Replacing a cracked deck
- Decks that lift or tilt
- Barefoot family yards
Grip when it's wet
We give the surface a texture that holds a wet, bare foot, because a pool deck spends its life splashed and a smooth trowel finish turns slick.
Water that runs away
We slope the deck so rain and splash head away from the house and away from the pool, so you're not fishing dirt out of the water.
A base that stays put
We dig out and pack the subgrade, the dirt the slab sits on, because a deck laid on loose fill settles and cracks right along with it.
Cracks where we choose
We cut control joints, shallow grooves that give the slab a planned place to crack, so any crack runs in a straight line instead of across the middle.
How our pool decks hold up, base to finish
- I measure and write the estimate myself, then run the job from forming through finishing, so whoever planned your base is there when it's packed.
- We've been at this since 2017, and the cure matters as much as the finish, so we keep the new slab damp while it gains strength.
- We're licensed and insured, and if your plans include a pool house or shed, ask about slab foundation building while I'm out measuring the deck.
Pool deck finishes and how they compare
Around a pool, grip for wet feet and how hot the surface feels count for more than looks, so I walk you through each finish with both in mind.
Broom finish
A broom dragged across the wet concrete leaves fine ridges for grip, and it suits anyone who wants a plain, practical deck.
Exposed aggregate
We wash off the top layer to show the stones underneath, which gives bare feet a bumpy, grippy surface with more character.
Textured finish
A texture rolled or troweled into the surface adds grip and some pattern, a middle ground when you want more than broom lines.
Coating or overlay
A coating or thin overlay over sound concrete changes the color and feel, and it suits a deck that's solid but tired looking.
Tell us about your pool deck
Send the deck size in square feet and the finish you're leaning toward. We reply within one business day to set up a free on-site estimate, with no obligation.
Pool deck questions we hear
How much does a concrete pool deck cost in Las Cruces?
Across the US, installing a concrete pool deck usually costs about $10.50 to $12 per square foot. That's a national figure, not our price, and the size of your deck, the finish and how much ground work your yard needs will move your number. Bring your square footage and we'll talk it through on site.
Which finish is best for a concrete pool deck?
The best finish is one that grips wet, bare feet without getting too hot to stand on, and broom, textured, exposed aggregate, coated, overlay and decorative finishes each strike that balance differently. Very dark finishes can get uncomfortable in the sun, so color matters as much as texture.
Why do you soak the ground before pouring a pool deck?
On expansive soil, the kind that swells when it gets wet, soaking the ground before the pour matters most for keeping the slab from lifting later. The soak usually takes a week to ten days depending on temperature and humidity, so it goes on the schedule. I'll look at your yard when I come out.
How do I maintain a concrete pool deck after it's poured?
The main job is keeping the joints sealed, including the seal where the pool's coping, the cap around the pool's edge, meets the deck. It's an ongoing task, not a one-time one, so plan on checking and resealing over the years. I'll show you what to look for before we leave.
Do I need a permit for a concrete pool deck in Las Cruces?
Check first, because the City of Las Cruces issues permits for most building projects after reviewing each application against its codes and standards. Owners apply through the city's Citizen Portal, and when a job needs a permit, we figure out which office covers the address, handle the application and keep you posted.
Who licenses concrete contractors in New Mexico?
New Mexico's Construction Industries Division licenses contractors, and anyone doing or offering construction contracting in the state needs a license from it. Its concrete class covers pouring and finishing concrete. The division's Las Cruces office takes calls at (575) 524-6320, weekdays 8 a.m. to 5 p.m.
Other concrete work we do
Concrete steps construction
When your deck sits above the yard or meets a back door, matching steps make the walk out easier.
Explore Concrete steps constructionSlab foundation building
A pool house, shed or equipment pad needs its own slab, and it's easy to plan alongside the deck.
Explore Slab foundation building