Garage floor concrete in Las Cruces NM - a solid floor on a well-packed base
Packed base, early pour, careful cure
Garage floor concrete is the slab your car, your workbench and your storage sit on, whether it's a new garage or an old floor that's cracked, sunk or chipped past patching. In Las Cruces, we start with the base under it and explain the whole plan before we pour.
When a new garage floor is the right call
A new garage floor is more than the pour, because the job runs from digging out the subgrade, the ground the slab sits on, through forms, steel and finishing. If the garage is cut into a slope, a concrete retaining wall can hold back the dirt.
Size, thickness, steel and an old slab coming out move the price, and the weather and any permit move the schedule, so I put the scope in writing before we start.
Best for
- New garage builds
- Sunk or badly cracked floors
- Workshops with heavy tools
A packed base, not raked dirt
We dig out soft dirt and pack the subgrade instead of raking it level, because a slab on loose fill settles right along with it.
Water headed out the door
We check where water runs before we set forms, so the floor sheds water out the garage door instead of back toward the house.
Base before looks
If the budget's tight, I'd rather trim the finish than the base, because you can dress up a floor later but can't reach the dirt under it.
An old slab, priced on its own
If an old slab has to come out first, I list that on the estimate by itself, so you can see what removal adds apart from the new floor.
What keeps a garage floor slab sound for years
- I come out myself to measure and write the estimate, then run the job from forming through finishing, so I see the base before any concrete does.
- We've been in business since 2017, and we cut control joints, shallow grooves in the fresh slab, early enough that cracks follow them instead of wandering.
- We're licensed and insured, and we start curing the slab right after finishing, because concrete that dries out too fast ends up weak and dusty on top.
Choosing the floor that fits your garage
Most choices come down to what the garage holds and how hard it gets used, so I'll lay out what each one changes before you pick.
Reinforced slab
Rebar, the steel tied inside the concrete, suits a garage that holds a heavy truck, a trailer or heavy shop tools.
Plain slab
A slab without steel suits a lighter-use garage for a car and storage, and it costs less per square foot.
Broom finish
A broom finish, a light texture dragged across the wet top, suits a floor that gets wet from tires and needs some grip.
Smooth or decorative
A smooth troweled top suits a shop floor you sweep a lot, and decorative concrete adds color or pattern if you'd like.
Tell us about your garage floor
Send your garage size in square feet and whether an old slab comes out. We'll reply within one business day to set up a free estimate on site, no obligation.
Garage floor questions from Las Cruces
How much does a new garage floor cost in Las Cruces?
A concrete slab or pad in Las Cruces usually costs about $5 to $10 per square foot, not counting staining or stamping. That's the area's usual range, not our quote, and if an old floor has to come out, demolition is added on top of the new slab. Your estimate puts our scope in writing.
How do I get a city permit for a garage floor in Las Cruces?
The City of Las Cruces issues permits for most building projects after it reviews your application, and you apply through its Citizen Portal. When your job needs a permit, we work out which office covers your address, handle the application and keep you posted.
Who is allowed to pour a garage floor in New Mexico?
A contractor who holds a New Mexico license, because state rules say a business has to be issued one before it can work as a contractor. The GS-4 class covers concrete, cement, walkways and driveways, and you can check that any contractor's license is valid using the search on the state's construction licensing page.
What happens on pour day for a new garage floor?
Plan on an early start, because hot weather guidance favors an early morning pour whenever possible, with delivery, placing and finishing done promptly. That guidance calls for curing right after, using a compound, soaking, a wet burlap or plastic cover, or curing paper. A windy, sunny day needs more care than a calm, humid one at the same temperature.
Will my new garage floor crack like the old one did?
A few fine cracks are likely, because slab design guidance says some cracking and curling is normal on every slab, even one designed and built right. That doesn't have to mean poor work, so I'll go over what to expect before we pour, and the control joints we cut give those cracks a place to go.
Does the soil in Las Cruces affect a new garage slab?
It can, because collapsible soils, which compact and collapse after they get wet, are common in New Mexico, and housing developments from Velarde to Las Cruces have run into them. Where a property has them, the advice is to keep water out of the ground, with xeriscaping instead of watered lawns and shrubs near foundations, and downspouts that carry runoff away.
Other concrete work we do
Decorative concrete
Adds color or pattern to a new slab when you want the garage floor to look like more than gray.
Explore Decorative concreteConcrete retaining walls
Holds back the grade beside a garage or driveway cut into a slope, so dirt and runoff stay off the slab.
Explore Concrete retaining walls